KIWOPRINT TATTO D-50 B

Acrylate and dispersion based pressure sensitive adhesive

KIWOPRINT TATTOO D 163 is used for the production of self-adhesive foil, labels and conveyors made of paper, cardboard, rigid PVC, polyester foil, pre-treated polyethylene and polypropylene, polyurethane, fiber glass, resopal etc. For special applications KIWOPRINT TATTOO D 163 can be used for the production of dry and wet transfers (e.g. temporary tattoos). Only raw materials which comply with the Cosmetics Regulation 1223/2009 were used for its production. The examination of KIWOPRINT TATTOO D 163 by an independent institute did not reveal any restriction of its merchantability considering the requirements of the cosmetics regulation. Materials bonded with KIWOPRINT TATTOO D 163 can be stored for a minimum of 1 year without any decrease of adhesive strength, if covered with a suitable silicone paper and kept dry and dark at room temperature.

KIWOPRINT TC-2500

KIWOPRINT TC 2500/1 is a high-quality, pressure sensitive adhesive for the production of self-adhesive materials made from cardboard, rigid PVC, glass, metal and industrial foams as well as films made of polycarbonate, polyester, pretreated polyethylene and polypropylene.

Materials bonded with KIWOPRINT TC 2500/1 are very difficult to remove or even irremovable, depending on the substrate type. Slow drying version of KIWOPRINT TC 2500. Also suitable for the application at higher room temperatures. Materials bonded with KIWOPRINT TC 2500/ 1 can be used at  temperatures of approx. -20°C to +80°C and can be stored for a minimum of 1 year without any decrease in adhesive strength, if covered with a suitable silicone paper and kept dry and dark at room temperature. In general, the adhesive film is sufficiently light fast. If direct influence of sunlight is to be expected, trials are absolutely essential.

Adhesive bonds are resistant to water, reduced aqueous acids and alkalies, as well as to many mineral oils. .

KIWOPRINT D-177

KIWOPRINT D 177 is a high-quality, dispersion based pressure sensitive adhesive for the production of removable materials made of paper, cardboard, plastic films (e.g. displays, stickers and notepads etc.). Very good aging and light resistance. Materials bonded with KIWOPRINT D 177 can be stored for a minimum of 1 year without any decrease of adhesive strength, if covered with a suitable silicone paper and kept dry and dark at room temperature. For KIWOPRINT D 177 we can provide a test certificate according to EN 71 Part 3 (safety of toys – migration of certain elements).

KIWOPRINT TC-2000

Screenable, solvent based pressure sensitive adhesive

KIWOPRINT TC 2000 is a high-quality pressure sensitive adhesive for the production of self-adhesive materials made of paper, cardboard, rigid PVC, glass, metal and industrial foams as well as films made of polycarbonate, polyester, pre-treated polyethylene and polypropylene. Suitable for decals made by the wet or dry transfer method. Materials bonded with KIWOPRINT TC 2000 are very difficult to remove or
even irremovable, depending on the characteristics of the substrate. Materials bonded with KIWOPRINT TC 2000 can be used at temperatures of approx. -20°C and +60°C and can be stored for a minimum of 1 year without any decrease of adhesive strength, if covered with a suitable silicone paper and kept dry and dark at room temperature. In general, the adhesive film is sufficiently light fast. If direct influence of sunlight is to be expected, trials are absolutely essential. Bondings are resistant to water, reduced aqueous acids and alkalis as well as to many mineral oils. A test certificate according to EN 71 Part 3 (safety of toys – migration of certain elements) can be provided.