EPSA 120

Electronic Power Supply

The EPSA 120 is an electronic power supply for UV discharge
lamps with a maximum power of 12 kW.

Features: The square-wave power output of the EPSA effects a greater UV yield at the same electrical power compared to the sinusoidal power output of a conventional transformer/choke ballast.

System-Features

  • 12 kW maximum power
  • Continuously variable power control
  • Service- and installation-friendly due to pluggable connections
  • Small space required/reduced footprint

Advantages

  • High lamp voltage
  • High efficiency
  • Reduction of production costs
  • Improved reignition
  • Longer lamp life
  • Good cost/performance ratio

EPSA 240

Electronic Power Supply

The EPSA 240 is an electronic power supply for UV discharge lamps with a maximum power of 24 kW.

Features: The square-wave power output of the EPSA effects a greater UV yield at the same electrical power compared to the sinusoidal power output of a conventional transformer/choke ballast.

System-Features

  • 24 kW maximum power
  • Continuously variable power control
  • Service- and installation-friendly due to pluggable connections
  • Small space required/reduced footprint

Advantages

  • High lamp voltage
  • High efficiency
  • Reduction of production costs
  • Improved reignition
  • Longer lamp life
  • Good cost/performance ratio

EPSA 340

Electronic Power Supply

The EPSA 340 is an electronic power supply for UV discharge lamps with a maximum power of 32 kW.

Features: The square-wave power output of the EPSA effects a greater UV yield at the same electrical power compared to the sinusoidal power output of a conventional transformer/choke ballast.

System-Features

  • 32 kW maximum power
  • Continuously variable power control
  • Service- and installation-friendly due to pluggable connections
  • Small space required/reduced footprint

Advantages

  • High lamp voltage
  • High efficiency
  • Reduction of production costs
  • Improved reignition
  • Longer lamp life
  • Good cost/performance ratio

EPSA-Series

Electronic power supply for UV medium-pressure lamps

Our EPSA-Series is a series of ballasts for UV medium pressure lamps with power levels ranging from 2.5 kW to 36.0 kW. The EPSAs are suitable for all UV water treatment applications, such as swimming pools, sewage or ballast water treatment systems. For the latter we offer a specially developed maritime design on request.

Characteristics: The high efficiency of up to 98 %, the dimming range from 5% and 100% and the integral HF sine-ignitor ensure an efficient and lamp-friendly operation. The wide range of supply voltages and the suitability for IT networks enable operation on almost all mains supplies worldwide. The permissible cable length of our EPSAs of up to 300 m offers the system manufacturer more flexibility and extended possibilities when setting up his control cabinets.

System-Features

  • Up to 36 kW lamp power
  • Analogue or digital control
  • High efficiency up to 98 %
  • Wide-range input and
  • IT-supply capability

Advantages

  • Gentle lamp start allows maximum lamp life
  • Up to 300 m connection cable to UV lamp
  • Very compact and lightweight design
  • Electrolytic capacitor-free design for max. lamp lifetime and high ambient temperatures

EPSA 80

Electronic Power Supply

The EPSA 80 is an electronic power supply for UV discharge lamps with a maximum power of 9,2 kW.

Features: The square-wave power output of the EPSA effects a greater UV yield at the same electrical power compared to the sinusoidal power output of a conventional transformer/choke ballast.

System-Features

  • 9,2 kW maximum power
  • Continuously variable power control
  • Service- and installation-friendly due to pluggable connections
  • Small space required/reduced footprint

Advantages

  • High efficiency
  • Reduction of production costs
  • Improved reignition
  • Longer lamp life
  • Good cost/performance ratio

EVG-Series

Electronic Power Supply Series

The electronic power supplies of our EPS-series are designed to operate amalgam low pressure UVC lamps. They are perfectly suitable for UV lamps with a lamp power from 4 W up to 1,200 W.

Characteristics: The newly developed digital control allows precise adjustment of the lamp and therefore, efficient and “gentle” operation. Due to an integral filament pre-heat and improved monitoring of the lamp operation, the lamp lifetime can be prolonged.

System- Features

  • Digitally controlled
  • Easy connection – “plug and play“ design
  • Up to 10 x 1,200 W power

Advantages

  • Improved re-ignition
  • Compact design
  • Energy efficient operation

MLC Rack

Multi-Lamp Controller

The modular lamp controller from the MLC series has been especially developed for the operation of amalgam low pressure UVC lamps. These devices are designed for lamps with a maximum lamp power of 1,000 W. Thanks to the modular concept, universal use is guaranteed and the system can be adapted to the customer’s needs.

Features: Digital control is used for precise adjustment and monitoring of lamp parameters. This ensures efficient, economic and gentle lamp operation, especially in installations with numerous burning positions. The actual operational status of each lamp is signaled by multi-coloured status LEDs. Extensive diagnosis information is available via a web server. It can be viewed via an internet browser. Remote control via web server is also possible.

System Features

  • Modular EPS-Driver for max. 64 UV-lamps
  • Universal supply voltage between 320-520V
  • Power Factor Correction integrated
  • Operation via Ethernet or PLC
  • Step-less power control

Advantages

  • Compact design
  • Energy-saving operation
  • Easy maintenance due to plug connectors and fasteners
  • Optimized electronic lamp ignition
  • Valuable diagnosis functions